引用本文:李万钟， 徐颖强， 孙戬， 段辰宸， 侯悦.粗糙表面弹塑性加卸载多级接触模型[J].中国表面工程,2015,28(4):39~46
LI Wanzhong, XU Yingqiang, SUN Jian, DUAN Chenchen, HOU Yue.Multilevel Contact Model of Elastic-Plastic Loading and Unloading on Rough Surfaces[J].China Surface Engineering,2015,28(4):39~46
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 5639次   下载 3666次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
粗糙表面弹塑性加卸载多级接触模型
李万钟， 徐颖强， 孙戬， 段辰宸， 侯悦1,2
1. 西北工业大学;2. 南车戚墅堰机车车辆工艺研究所有限公司
摘要:
真实工程表面在微观尺度上都是粗糙的，它们之间的接触实际上是表面微凸体的接触，粗糙表面间的接触行为对接触部件的真实承载能力、摩擦磨损等性能都有重要影响，研究工程表面间的真实接触行为是摩擦学研究的主要内容之一。采用最小均方误差法得到表面轮廓抛物线拟合曲线，在最大限度近似原始表面轮廓的同时，该方法能够更好地适用于微凸体弹塑性接触加卸载模型。通过单个微凸体上的支承载荷将总体级别模型和微凸体级别模型相联系，建立粗糙表面多级接触加卸载模型。以柱面与平面接触为算例，将接触区域视为与圆柱母线平行的离散线条集合，得到微凸体法向变形量和粗糙表面真实接触面积，该模型可用于分析粗糙表面弹塑性加卸载的真实接触行为。
关键词:  线接触  粗糙表面  多级接触  加卸载  弹塑性
DOI：10.11933/j.issn.1007-9289.2015.04.005
分类号:
基金项目:
Multilevel Contact Model of Elastic-Plastic Loading and Unloading on Rough Surfaces
LI Wanzhong, XU Yingqiang, SUN Jian, DUAN Chenchen, HOU Yue1,2
1. School of Mechanical Engineering, Northwestern Polytechnical University;2. CSR Qishuyan Institute Co. Ltd.
Abstract:
Real engineering surfaces are rough at microscopic level and the contact between two rough surfaces is actually the asperities contact. The contact behavior of rough surfaces plays a vital role for the real carrying capacity, friction and wear of contact parts. The research of the real contact behavior between engineering surfaces is one of tribological main contents. Parabolic approximation curves of the rough profile obtained by the least mean squares approach can perferably approximate original surface profile preferably. Meanwhile, it can be suitable for asperity contact loading and unloading model better. By means of single asperity supporting load, the global is connected with the asperity level model, and a multilevel contact model of rough surfaces is established. Taking contact between the cylinder and flat surface for instance, the contact zone is treated as a summation of discrete lines paralleled to the cylindrical generatrix, and asperity interference and real contact area of the rough surfaces are obtained. This model is suitable for researching real contact behavior of elasticplastic loading and unloading between rough surfaces.
Key words:  line contact  rough surface  multilevel contact  loadingunloading  elastic-plastic
手机扫一扫看