| 引用本文: | 王建辉， 赵悦菊， 王国刚， 滕济林， 张淼.硅橡胶在积污过程中的润湿行为[J].中国表面工程,2014,27(6):122~127 |
| WANG Jianhui, ZHAO Yueju, WANG Guogang, TENG Jilin, ZHANG Miao.Wetting Behavior of Silicone Rubber During the Contamination[J].China Surface Engineering,2014,27(6):122~127 |
|
| |
|
|
|
|
| 摘要: |
| 利用静态接触角法、接触角滞后和HC喷水分级法对自然积污过程中的硅橡胶进行了表面润湿性研究，用粗糙度仪和扫描电镜对样片进行表征分析，研究发现：随着硅橡胶不断的积污，表面粗糙度越大，静态接触角随之也增大，接触角滞后变小，滞后由小到大的顺序是：S3（中污）
|
| 关键词: 硅橡胶 积污 接触角 润湿性 粗造度 |
| DOI：10.11933/j.issn.1007-9289.2014.06.015 |
| 分类号: |
| 基金项目: |
|
| Wetting Behavior of Silicone Rubber During the Contamination |
|
WANG Jianhui, ZHAO Yueju, WANG Guogang, TENG Jilin, ZHANG Miao
|
|
Research and Development Center, Beijing Guodian Futong Science and Technology Development Co.,Ltd., Beijing 100070
|
| Abstract: |
| The surface wettability of the silicone rubber in the course of natural contamination was studied by testing the static contact angle, hysteresis of contact angle and water spray classification, and the samples were characterized with the roughness tester and SEM at the same time. The results show that with the contamination of silicone rubber, and surface roughness increasing, the static contact angle increases, and the contact angle greater hysteresis decreases. The ascending order is: S3moderate polluted sample
|
| Key words: silicone rubber contamination contact angle wettability roughness |
|
