引用本文:郭龙文， 杨能阁， 陈燕.磁力研磨工艺对整体叶盘表面完整性的影响[J].中国表面工程,2013,26(3):10~14
GUO Long-Wen, YANG Neng-Ge, CHEN Yan.Influence of Magnetic Abrasive Finishing Technology on Surface Integrity of Vane-integrated Disk[J].China Surface Engineering,2013,26(3):10~14
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 5271次   下载 3456次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
磁力研磨工艺对整体叶盘表面完整性的影响
郭龙文， 杨能阁， 陈燕1,2
1. 辽宁科技大学 机械工程与自动化学院， 辽宁 鞍山 114051;2. 中航工业西安航空发动机（集团）有限公司， 西安 710021
摘要:
针对铣削加工对整体叶盘零件表面完整性控制不能满足使用要求的难题，利用磁力研磨所特有的柔性、自适应性、可控性等优点，研发了一种基于机器人的自由曲面磁力研磨装置，对整体叶盘零件进行加工试验。试验结果表明：经过磁力研磨后零件的表面粗糙度数值大幅度降低；铣削加工残留下来的加工纹理基本去除；原始表面上的微裂纹减弱或彻底消除；近表层原始显微组织中的变质层被部分去除；残余应力也明显减小。由此表明磁力研磨加工工艺能够提高整体叶盘的表面完整性，从而可以提高零件的疲劳强度和使用寿命。
关键词:  磁力研磨  整体叶盘  表面完整性
DOI：
分类号:
基金项目:国家自然科学基金（51105187）
Influence of Magnetic Abrasive Finishing Technology on Surface Integrity of Vane-integrated Disk
GUO Long-Wen, YANG Neng-Ge, CHEN Yan1,2
1. School of Mechanical Engineering and Automation, University of Science and Technology Liaoning, Anshan 114051, Liaoning;2. Avic Xi′an Aeroengine (GROUP) Ltd., Xi′an 710021
Abstract:
To solve the problem that the surface integrity control of vaneintegrated disk in the milling process does not satisfy the working requirements, a freeform surface magnetic abrasive finishing equipment based on robot manipulator was developed to perform the vaneintegrated disk experiment which has the advantages of flexibility, adaptability, controllability, and so on. The results show that after magnetic abrasive finishing, the surface roughness value is significantly reduced, the milling machining leave of processing texture is removed, the original surface microcrack decreases or is thoroughly eliminated, the original microstructure of near surface damaged layer is partly removed, and the residual stress value is obviously reduced. From above all, it is indicated that the magnetic grinding processing can improve the surface integrity of the vaneintegrated disk, and the fatigue strength and service life of work piece are improved.
Key words:  magnetic abrasive finishing  vaneintegrated disk  surface integrity
手机扫一扫看