引用本文:尹树桐,李庆芬,郭亚军,任正义,王俊.滑动轴承磁控溅射镀层技术的应用研究[J].中国表面工程,2002,(2):39~42
.Research on Magnetron Sputtering Coating Process of Sliding Bearing[J].China Surface Engineering,2002,(2):39~42
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 5091次   下载 84次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
滑动轴承磁控溅射镀层技术的应用研究
尹树桐,李庆芬,郭亚军,任正义,王俊
作者单位
摘要:
研究了用磁控溅射方法在滑动轴承表面溅镀一层AlSn20镀层的新技术。对AlSn20镀层的表面形貌、组织结构、结合强度及镀层硬度进行了分析，并与美巴公司同类轴瓦进行了对比。结果证明：选择合适的工艺参数可获得与美巴轴瓦相似的组织结构与性能。
关键词:  应用研究 磁控溅射 镀层 滑动轴承
DOI：
分类号:TH133.31 TG174.444
基金项目:
Research on Magnetron Sputtering Coating Process of Sliding Bearing
YIN Shu-tong  LI Qing-fen  GUO Ya-jun  REN Zheng-yi  WANG Jun
Abstract:
Magnetron sputtering AlSn20 coating process for sliding bearing was developed in this paper. The surface topographies, microstructures, bonding strength and hardness of coating were examined and analysed. A comparison between the bearings made by Miba Gleitlager AG and by above process were also made. The result proved that using the proper technologic parameters the microstructures and performance of bearing similar to the bearing made by Miba can be obtained.
Key words:  magnetron sputtering,coating,sliding bearing,
手机扫一扫看