引用本文:杨晖,王汉功.超音速电弧喷涂粒子速度的测定[J].中国表面工程,1999,(2):8~10
.Particle Velocities of High Velocity Air Arc Spraying[J].China Surface Engineering,1999,(2):8~10
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4795次   下载 104 本文二维码信息
码上扫一扫!
分享到: 微信 更多
超音速电弧喷涂粒子速度的测定
杨晖,王汉功
作者单位
摘要:
在电弧喷涂中,喷涂粒子的速度是影响涂层质量的重要因素,超音速电弧喷涂系统利用超音速气体雾化,加速喷涂粒子,增加喷涂粒子的速度,从而改善了涂层质量,采用Kodak1012型高速运动分析仪对喷涂粒子的速度进行了测定,结果表明,喷涂φ2.2mmT8钢丝时,喷涂粒子的平均速度可达到291m/s。
关键词:  热喷涂 电弧喷涂 超音速 粒子速度 测定
DOI:
分类号:TG174.442
基金项目:
Particle Velocities of High Velocity Air Arc Spraying
Yang Hui  Wang Hangong  Liu xueyuan  Su Xunjia  Guo Xiaohua
Abstract:
Particle velocities of arc spraying have a great influence on coatings quality. High velocity air arc (HVAA) spraying system is higher than conventional arc spraying on particle velocity and temperature. The liquid droplets are broken or fined and speeded up by a high velocity compressed air, which formo spraying particle jet. Particle velocities are determined from high speed images of particle streaks taken with a Kodak high velocity vision system and were evaluated using image analysis, The average particle velocity of 2.mm T8 steel of high velocity air arc spraying is about 296m/s.
Key words:  Thermal spraying, Particle velocity, Arc spraying
手机扫一扫看