| 引用本文: | 康玉清,袁轩一,曹茂盛.化学镀制备玄武岩纤维/镍核壳结构及其表征[J].中国表面工程,2006,(6):35~38 |
| KANG Yu-Qing,YUAN Xuan-Yi,CAO Mao-Sheng.Preparation and Characterization of Basalt Fibers/nickel core-shell Structures Synthesized by Electroless Plating[J].China Surface Engineering,2006,(6):35~38 |
|
| |
|
|
| 本文已被：浏览 4525次 下载 2798次 |
码上扫一扫！ |
|
|
| 化学镀制备玄武岩纤维/镍核壳结构及其表征 |
|
康玉清,袁轩一,曹茂盛
|
|
北京理工大学材料科学与工程学院,北京100081
|
|
| 摘要: |
| 采用简单易行的化学镀方法，在较低的温度下制备出一种新型的玄武岩纤维／镍核壳结构。SEM、XRD、XPS分析结果表明，金属Ni颗粒吸附在玄武岩纤维表面，形成了一层均匀连续的镍壳层。通过对试验结果进行分析，得出了制备玄武岩纤维／镍核壳结构的最佳温度和pH值分别为50℃和10．0。文中对化学镀核壳结构的形成机理也进行了初步分析。 |
| 关键词: 玄武岩纤维 核壳结构 化学镀 |
| DOI： |
| 分类号: |
| 基金项目:国防科工委十一五基础科研计划(编号略 )和武器装备预研基金(编号略)资助课题。 |
|
| Preparation and Characterization of Basalt Fibers/nickel core-shell Structures Synthesized by Electroless Plating |
|
KANG Yu-Qing,YUAN Xuan-Yi,CAO Mao-Sheng
|
|
School of Material Science and Engineering, Beijing Institute of Technology, Beijing 100081 China
|
| Abstract: |
| Basalt fibers/nickel core-shell structures were synthesized by an electroless plating method at low temperature. The core-shell structures were characterized by means of SEM and their components were analyzed by EDS, XRD and XPS. The results showed that the surface of basalt fibers was coated by a continuous and uniform nickel shells. Especially, the optimal temperature and pH value of electroless plating, namely, 50℃ and 10.0, have been ascertained. The possible mechanism of the formation of basalt fibers/nickel core-shell structures was discussed. |
| Key words: basalt fibers core-shell structures electroless plating |
|
