K417G高温合金纳米氧化锆热障涂层的制备与性能

吴 静<sup>1</sup>; 朱丽娟<sup>1</sup>; 袁福河<sup>2</sup>; 段绪海<sup>2</sup>

引用本文:	吴静，朱丽娟，袁福河，段绪海.K417G高温合金纳米氧化锆热障涂层的制备与性能[J].中国表面工程,2006,(5):26~31
	WU Jing，ZHU Li-juan, YUAN Fu-he, DUAN Xu-hai.Preparation and Properties of Nano-ZrO₂ Thermal Barrier Coating on K417G Superalloy[J].China Surface Engineering,2006,(5):26~31

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 4413次下载 3467次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
K417G高温合金纳米氧化锆热障涂层的制备与性能
吴静，朱丽娟，袁福河，段绪海^1,2
1．沈阳理工大学材料科学与工程学院，沈阳 110168;2．沈阳黎明航空发动机（集团）有限责任公司，沈阳 110043

摘要:

通过探讨喷涂工艺参数对纳米氧化锆涂层结构和性能影响的规律，使纳米氧化锆未熔颗粒基本上保持原始氧化锆粉末的纳米级晶粒大小，熔化的颗粒则起粘结剂的作用，使涂层内氧化锆颗粒问结合牢固，涂层结构致密。纳米氧化锆热障涂层与常规氧化锆涂层相比导热系数降低，隔热效果得到明显提高。力学试验结果则表明，纳米结构热障涂层在硬度、抗热冲击性能、耐冲击性以及结合强度等方面都明显高于常规粉末制备的涂层。

关键词: 等离子喷涂热障涂层氧化结合强度

DOI：

分类号:

基金项目:

Preparation and Properties of Nano-ZrO₂ Thermal Barrier Coating on K417G Superalloy

WU Jing，ZHU Li-juan, YUAN Fu-he, DUAN Xu-hai^1,2

1.School of Materials Science and Engineering, Sheyang Ligong University, Shenyang 110168;2. Shenyang Liming Aero- engine Group Corp. Ltd. Shenyang 110043

Abstract:

The effects of plasma spraying parameters on the microstructures and properties of nanocrystalline yttria stabilized zirconia thermal barrier coating were studied. The nano-coating can retain ultrafine grain size of the nanocrystalline feedstock. The thermal insulation property of nano-zirconia coatings is excellent. The better performance of the nano-zirconia coatings is attributed to their compactness and good cohesion between the unmelted nano-zirconia particles by the well-melted zirconia particles as a binder. The test results of mechanical properties indicated that the nano-coatings possess higher hardness and bonding strength, as well as better thermal shock resistance.

Key words: plasma spraying thermal barrier coating oxidation bond strengh