引用本文:孙娜,胡传忻.伪装网表面工艺与结构的研究[J].中国表面工程,2004,(4):46~48
.The Research on Surface Technology and Structures for Camouflage Web[J].China Surface Engineering,2004,(4):46~48
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4767次   下载 90 本文二维码信息
码上扫一扫!
分享到: 微信 更多
伪装网表面工艺与结构的研究
孙娜,胡传忻
作者单位
摘要:
探讨了经过化学镀处理的伪装网基体表面的吸波机理;在雷达吸波材料的基础上,提出三维结构在伪装网吸波效果中所起的作用,通过初步对平板、锥体和丛林式结构的试验对比,丛林式结构在2~18GHz频段中.合格带宽12.25dB,最大衰减值达到18.24dBn成网测试中,丛林式结构的伪装网对立方体模型的雷达散射截面减缩在7.59GHz,达到最大值29.75dBsm。
关键词:  伪装网 化学镀 吸波结构
DOI:
分类号:TQ153 TG174.442
基金项目:
The Research on Surface Technology and Structures for Camouflage Web
SUN Na  HU Chuan-xin
Abstract:
This Paper discusses the principle of microwave absorption for the surface of camouflage web using electroless plating. The three-dimensional structure plays an important role for the radar absorption of camouflage web on the basis of radar absorbing materials. Among the plate, cone and jungle structures, the last one in the frequency range of 2~18GHz, shows good microwave absorption with 12.25GHz satisfied width and peak value of 18.24dB. The reduction of radar cross section of the cube model covered the jungle structure web reaches peak value of 29.75dBsm at the frequency of 7.59GHz.
Key words:  camouflage web, electroless plating, radar-absorbing structure
手机扫一扫看