引用本文:靳生,刘谦,戴庆荣.电弧喷涂制备Al-Al2O3耐磨防滑涂层工艺优化和摩擦学性能研究[J].中国表面工程,2003,(2):10~12,16
.Study on the Tribological Properties and Optimized Parameters of Non-skidding Coating Produced by Arc Spraying[J].China Surface Engineering,2003,(2):10~12,16
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 4401次   下载 150次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
电弧喷涂制备Al-Al2O3耐磨防滑涂层工艺优化和摩擦学性能研究
靳生,刘谦,戴庆荣
作者单位
摘要:
介绍了一种φ3mm铝基陶瓷复合材料粉芯丝材，用于高速电弧喷涂制备耐磨防滑涂层。以涂层的耐磨性为判据，采用正交试验对喷涂工艺参数进行了优化，并采用优化参数制备耐磨防滑涂层，与普通铝涂层的摩擦学性能进行对比，结果表明制备的耐磨防滑涂层摩擦因数高，防滑性能良好，弥散分布的A12OO3粒子提高了涂层的摩擦因数保持能力。
关键词:  耐磨防滑涂层 高速电弧喷涂 制备 铝基陶瓷复合材料 耐磨性 工艺参数 优化 摩擦学性能 粉芯丝材
DOI：
分类号:TG174.442
基金项目:
Study on the Tribological Properties and Optimized Parameters of Non-skidding Coating Produced by Arc Spraying
JIN Sheng1  LIU Qian2  DAI Qing-rong3
Abstract:
In this research, f 3mm cored wires for electric arc spraying of Al/Al2O3 coatings were developed. The optimum processing parameters of arc spraying were studied using the orthogonal experiment method. The best wear-resistance of coating was adopted as the criterian of the experiments. Based on the optimized parameters the non-skidding coating was produced. The results showed that the non-skidding coating displayed higher friction coefficient than pure aluminium coating. The Al2O3 powders distributed in coating evidently improved the maintaining ability of friction coefficient.
Key words:  non-skidding coating,Al2O3,composite materials,cored wire,
手机扫一扫看