| 引用本文: | 汤宝寅,王松雁,王晓峰,甘孔银,曾照明,田修波.9Cr18轴承钢的金属离子加氮离子复合注入处理新工艺[J].中国表面工程,2000,(4):24~28 |
| .Multiple Implantation Treatment Technique Using Metal and Nitrogen Ions for 9Cr18 Bearing Steel[J].China Surface Engineering,2000,(4):24~28 |
|
|
| 摘要: |
| 简单地叙述了金属等离子体浸没离子注入与沉积（ＭｅＰⅢＤ）表面处理新工艺的发展，以及ＭｅＰⅢＤ工艺对于脉冲阴极弧金属等离子体源的要求。详细报导了９Ｃｒ１８轴承钢样品的氮离子注入表面处理工艺及金属离子加氮离子复合注入处理新工艺，对被处理和未被处理试样进行了显微硬度、磨痕、摩擦因数及腐蚀特性测试后表明：用金属离子加氮离子复合注入处理的９Ｃｒ１８钢试样的表面特性改善明显优于只有氮离子处理的试样，证明脉冲阴 |
| 关键词: 金属离子 氮离子 离子注入 表面改性 轴承钢 |
| DOI： |
| 分类号:TG174.444 TG142.41 |
| 基金项目: |
|
| Multiple Implantation Treatment Technique Using Metal and Nitrogen Ions for 9Cr18 Bearing Steel |
|
Paul K Chu,Tang Baoyin,Wang Songyan,Wang Xiaofeng,Gan Kongyin,Zeng Zhaoming,Tian Xiubo,Paul K Chu
|
| Abstract: |
| Development of the new surface treatment technique of metal plasma immersion ion implantation and deposition (MePIII D) was briefly described, and the demand for pulse cathodic arc metal plasme source under the conditions of the MePIII D technique was presented in the paper.The surface treatment technique using nitrogen ion implantation and the multiple implantation treatment technique of metal and nitrogen ions on 9Cr18 bearing steel samples were reported in details. The microhardness,wear scar, coefficient of friction, and corrosion behavior were measured fro the treated and untreated samples, in was shown that improvement of surface properties of 9Cr18 steel samples treated by the multiple implantation is better than the samples treated only by nitrogen implantation, and the combination of pules cathodic arc metal plasma source wity gas plasma immersion ion implantation is a very effective way for surface strengthening of modern materials. |
| Key words: metal plasma immersion ion implantation and deplsition, pulse cathodic arc metal plasma source, ion implanation, surface modification |
